The EM Audio Mini Team 12” proves that you don’t need a massive cone to make massive noise. Built on the same philosophy as our larger Team platforms, this 12” is a compact powerhouse designed for extreme output, tight response, and daily reliability.

This isn’t your average 12. The Mini Team 12 was engineered for builders who want serious low-end performance in a smaller footprint—perfect for tight builds, high-output daily systems, and competitive setups where efficiency and control matter.

Rated at a conservative 3,500 watts RMS, this sub is built to take real power and deliver consistent performance without breaking down. From the motor to the soft parts, every component was carefully selected and tested to handle abuse while maintaining clean, accurate bass.

At its core, the Mini Team 12 features a high-efficiency motor structure designed to deliver strong motor force and excellent control across the entire stroke. Paired with a 3” (86mm) 8-layer American-made aluminum flat wound PE voice coil, this sub offers impressive thermal handling and output capability for its size.

The 10” progressive spider pack keeps the moving assembly stable and centered during extreme excursion, allowing the sub to stay tight and controlled even when pushed hard. Combined with EM Audio’s advanced soft parts, this results in smooth low-end response with minimal distortion.

Cooling is handled through pole venting and perimeter voice coil cooling, helping reduce heat buildup and power compression so you can play longer and harder.

The heavy-duty TI frame and ventilated structure improve airflow and durability, ensuring the Mini Team 12 holds up under serious daily abuse.

Small footprint. Big attitude. Real power.

If you’re looking for a 12 that can keep up with larger setups and still hit hard, the Mini Team 12 is built for you.

Key Features

• 3,500 Watts RMS Power Handling (Conservative)
• Up to 25,000 Watts Peak Power
• 12” High-Output Platform
• Custom Hand-Built Design
• 3” (86mm) 8-Layer American-Made Aluminum Flat Wound PE Voice Coil
• 10” Progressive Spider Pack
• Advanced Cooling System (Pole Vent + Perimeter Coil Cooling)
• High-Efficiency Motor Design
• Low Distortion, High Output Performance
• 4 Gauge Push Terminals
• Heavy-Duty TI Frame
• 4th Order and 6th Order Friendly

Recommended Enclosure

• Ported: 2.0 – 3.0 cu ft
• Tuning: ~32–35Hz

For best results, we recommend working with a professional box designer.

The post 12″ Custom hand built subwoofer 3500w (Mini Team 12) appeared first on EM Audio Subwoofers.

The EM Audio Mini Team 15” is where size, power, and control come together to create a serious daily driver that doesn’t hold back. Built for those who want hard-hitting low end with authority, the 15” platform delivers deeper extension than a 12 while still maintaining the speed and responsiveness needed for clean musical performance.

This subwoofer was designed from the ground up to handle real power and real-world abuse. Rated at a conservative 3,500 watts RMS, the Mini Team 15 is built to stay consistent under load—whether you’re daily driving, demoing, or pushing your system to its limits.

At the core of the Mini Team 15 is a high-efficiency motor structure engineered for strong motor force and precise control throughout the entire stroke. This allows the sub to move serious air while keeping distortion low and output high.

We paired that with a 3” (86mm) 8-layer American-made aluminum flat wound PE voice coil, giving this sub excellent thermal capacity and efficiency. The result is a driver that can take power all day and keep performing.

The 10” progressive spider pack keeps the moving assembly centered and stable during heavy excursion, allowing for smooth, controlled movement even at high output levels. Combined with EM Audio’s advanced soft parts, this sub delivers deep, aggressive bass without losing accuracy.

Cooling is handled through pole venting and perimeter voice coil cooling, reducing heat buildup and minimizing power compression so you can play longer and harder without performance drop-off.

The heavy-duty TI frame and ventilated structure provide durability and improved airflow, ensuring the Mini Team 15 holds up under serious daily punishment.

More cone area. More air movement. More impact.

If you’re looking for a sub that hits harder, digs deeper, and keeps up with high-power systems, the Mini Team 15 is ready.

Key Features

• 3,500 Watts RMS Power Handling (Conservative)
• Up to 25,000 Watts Peak Power
• 15” High-Output Platform
• Custom Hand-Built Design
• 3” (86mm) 8-Layer American-Made Aluminum Flat Wound PE Voice Coil
• 10” Progressive Spider Pack
• Advanced Cooling System (Pole Vent + Perimeter Coil Cooling)
• High-Efficiency Motor Design
• Low Distortion, High Output Performance
• 4 Gauge Push Terminals
• Heavy-Duty TI Frame
• 4th Order and 6th Order Friendly

Recommended Enclosure

• Ported: 3.5 – 4.5 cu ft
• Tuning: ~30–33Hz

For best performance, we recommend working with a professional box designer.

The post 15″ Custom hand built subwoofer 3500w (Mini Team 15) appeared first on EM Audio Subwoofers.

The EM Audio Mini Team 18” is built for those who want serious low-end authority without stepping into the largest platforms. Sitting perfectly between the 15” and 21”, this sub delivers deep extension, massive air movement, and strong daily performance—all while maintaining the control and responsiveness EM Audio is known for.

This isn’t just a bigger woofer—it’s a purpose-built high-output driver designed to handle real power and real abuse. Rated at a conservative 3,500 watts RMS, the Mini Team 18 is engineered to stay consistent under heavy load, making it ideal for daily systems, demos, and high-output builds.

At the core is a high-efficiency motor structure designed to provide strong motor force and precise control across the entire stroke. This allows the 18” platform to move significant air while maintaining tight, accurate bass response.

The Mini Team 18 is equipped with a 3” (86mm) 8-layer American-made aluminum flat wound PE voice coil, delivering excellent thermal capacity and efficiency. This setup allows the sub to take power confidently while maintaining performance during extended play.

A 10” progressive spider pack keeps the moving assembly centered and stable during extreme excursion, ensuring smooth operation and reduced distortion even at high output levels. Combined with EM Audio’s latest soft parts, this sub delivers deep, aggressive bass with control you can feel.

Cooling is handled through pole venting and perimeter voice coil cooling, effectively reducing heat buildup and power compression so the sub can stay consistent during long demos or daily use.

The heavy-duty TI frame and ventilated motor structure improve airflow and durability, ensuring this sub holds up under serious punishment.

More cone area. More depth. More presence.

If you’re looking for a sub that delivers deep, ground-shaking bass while still staying musical, the Mini Team 18 is the perfect balance.

Key Features

• 3,500 Watts RMS Power Handling (Conservative)
• Up to 25,000 Watts Peak Power
• 18” High-Output Platform
• Custom Hand-Built Design
• 3” (86mm) 8-Layer American-Made Aluminum Flat Wound PE Voice Coil
• 10” Progressive Spider Pack
• Advanced Cooling System (Pole Vent + Perimeter Coil Cooling)
• High-Efficiency Motor Design
• Low Distortion, High Output Performance
• 4 Gauge Push Terminals
• Heavy-Duty TI Frame
• 4th Order and 6th Order Friendly

Recommended Enclosure

• Ported: 4.5 – 5.5 cu ft
• Tuning: ~29–32Hz

For best performance, we recommend working with a professional box designer.

The post 18″ Custom hand built subwoofer 3500w (Mini Team 18) appeared first on EM Audio Subwoofers.

The EM Audio Mini Team 10” is proof that small doesn’t mean weak. Built for tight spaces and serious output, this subwoofer delivers aggressive, hard-hitting bass in a compact footprint—perfect for builds where space is limited but performance still matters.

This isn’t your average 10. The Mini Team 10 was engineered to handle real power and daily abuse, making it ideal for high-output compact builds, single-sub setups, or multi-sub walls where efficiency and control are key.

Rated at a conservative 3,500 watts RMS, this sub is designed to take power and keep performing without breaking down. Every component—from the motor to the soft parts—was carefully selected to balance durability, efficiency, and clean output.

At the core is a high-efficiency motor structure built to provide strong motor force and tight control across the entire stroke. This allows the Mini Team 10 to stay responsive and accurate while still delivering impressive output for its size.

We paired that with a 3” (86mm) 8-layer American-made aluminum flat wound PE voice coil, giving this sub excellent thermal capacity and power handling. It’s built to stay consistent even during long, high-power play sessions.

The 8.5” progressive spider pack keeps the moving assembly centered and stable during heavy excursion, ensuring smooth operation and reduced distortion even when pushed hard. Combined with EM Audio’s advanced soft parts, this sub delivers tight, punchy bass with surprising depth.

Cooling is handled through pole venting and perimeter voice coil cooling, helping reduce heat buildup and power compression so you can play longer and harder.

The heavy-duty TI frame and ventilated structure provide durability and improved airflow, ensuring the Mini Team 10 holds up under serious use.

Compact size. Serious attitude. Real output.

If you need a 10” that can keep up with bigger systems and still hit hard, the Mini Team 10 delivers.

Key Features

• 3,500 Watts RMS Power Handling (Conservative)
• Up to 25,000 Watts Peak Power
• 10” High-Output Platform
• Custom Hand-Built Design
• 3” (86mm) 8-Layer American-Made Aluminum Flat Wound PE Voice Coil
• 8.5” Progressive Spider Pack
• Advanced Cooling System (Pole Vent + Perimeter Coil Cooling)
• High-Efficiency Motor Design
• Low Distortion, High Output Performance
• 4 Gauge Push Terminals
• Heavy-Duty TI Frame
• 4th Order and 6th Order Friendly

Recommended Enclosure

• Ported: 1.5 – 2.25 cu ft
• Tuning: ~33–36Hz

For best performance, we recommend working with a professional box designer.

The post 10″ Custom hand built subwoofer 3500w (Mini Team 10) appeared first on EM Audio Subwoofers.