Highlights

• 2,500W RMS rated (2.5k line)
• 3″ PE voice coil
• 12-spoke basket
• Designed for a small ported box
• Mounting depth: 7.825″
• Hand built to order in North Carolina

Lower power options in the same size: Bagger 1.2k 12 and Bagger 1.5k 12.

Full specs and enclosure recommendations are coming soon. Message us with your bike and bag dimensions and we will size it with you.

Every EM Audio subwoofer is hand built to order in North Carolina. Custom orders take a minimum of 15 business days to build and are final sale. Real carbon fiber dust caps are in Dust Caps. Recone kits are available for every model we make, so a blown sub is a rebuild, not a replacement.

The post Bagger 2.5k 12 – 12″ 2,500W RMS Motorcycle Subwoofer appeared first on EM Audio Subwoofers.

Highlights

• 1,500W RMS rated
• 3″ PE voice coil
• Small-box design for bagger and saddlebag enclosures
• Hand built to order in North Carolina

Full specs and enclosure recommendations are coming soon. Message us with your bike and bag dimensions and we will size it with you.

Every EM Audio subwoofer is hand built to order in North Carolina. Custom orders take a minimum of 15 business days to build and are final sale. Custom powder-coat frame and dustcap colors, a stiffer spider pack, direct 8 ga. OFC leads and custom dustcap logo text are available as options above. Real carbon fiber dust caps are in Dust Caps. Recone kits are available for every model we make, so a blown sub is a rebuild, not a replacement.

The post Bagger 1.5k 12 – 12″ 1,500W RMS Motorcycle Subwoofer appeared first on EM Audio Subwoofers.

Highlights

• 2,500W RMS rated (2.5k line)
• Mounting depth: 7.5″
• Made for small bagger and saddlebag enclosures
• Hand built to order in North Carolina

Lower power options in the same size: Bagger 1.2k 10 and Bagger 1.5k 10.

Full specs and enclosure recommendations are coming soon. Message us with your bike and bag dimensions and we will size it with you.

Every EM Audio subwoofer is hand built to order in North Carolina. Custom orders take a minimum of 15 business days to build and are final sale. Real carbon fiber dust caps are in Dust Caps. Recone kits are available for every model we make, so a blown sub is a rebuild, not a replacement.

The post Bagger 2.5k 10 – 10″ 2,500W RMS Motorcycle Subwoofer appeared first on EM Audio Subwoofers.

Highlights

• 1,500W RMS rated
• 3″ PE voice coil
• Small-box design for bagger and saddlebag enclosures
• Hand built to order in North Carolina

Full specs and enclosure recommendations are coming soon. Message us with your bike and bag dimensions and we will size it with you.

Every EM Audio subwoofer is hand built to order in North Carolina. Custom orders take a minimum of 15 business days to build and are final sale. Custom powder-coat frame and dustcap colors, a stiffer spider pack, direct 8 ga. OFC leads and custom dustcap logo text are available as options above. Real carbon fiber dust caps are in Dust Caps. Recone kits are available for every model we make, so a blown sub is a rebuild, not a replacement.

The post Bagger 1.5k 10 – 10″ 1,500W RMS Motorcycle Subwoofer appeared first on EM Audio Subwoofers.

Highlights

• 1,200W RMS rated (1.2k v2 line)
• 3″ voice coil
• Made for small bagger and saddlebag enclosures
• Hand built to order in North Carolina

Need more output from the same size? See the Bagger 1.5k 12 and the Bagger 2.5k 12.

Full specs and enclosure recommendations are coming soon. Message us with your bike and bag dimensions and we will size it with you.

Every EM Audio subwoofer is hand built to order in North Carolina. Custom orders take a minimum of 15 business days to build and are final sale. Real carbon fiber dust caps are in Dust Caps. Recone kits are available for every model we make, so a blown sub is a rebuild, not a replacement.

The post Bagger 1.2k 12 – 12″ 1,200W RMS Motorcycle Subwoofer appeared first on EM Audio Subwoofers.

Highlights

• 1,200W RMS rated (1.2k v2 line)
• 3″ voice coil
• Made for small bagger and saddlebag enclosures
• Hand built to order in North Carolina

Need more output from the same size? See the Bagger 1.5k 10 and the Bagger 2.5k 10.

Full specs and enclosure recommendations are coming soon. Message us with your bike and bag dimensions and we will size it with you.

Every EM Audio subwoofer is hand built to order in North Carolina. Custom orders take a minimum of 15 business days to build and are final sale. Real carbon fiber dust caps are in Dust Caps. Recone kits are available for every model we make, so a blown sub is a rebuild, not a replacement.

The post Bagger 1.2k 10 – 10″ 1,200W RMS Motorcycle Subwoofer appeared first on EM Audio Subwoofers.

Highlights

• 2,000W RMS tested; 7,000W on burps
• 12 N52H neodymium blocks
• 2.5″ 4-layer aluminum flat-wound American-made coil; dual 1, dual 2 or dual 4 ohm when available (message us first to check)
• Double-layer 6.5″ × 2.5″ linear red spider pack
• Pressed pulp cone with a big roll red-stitched or tall roll surround
• 3.5″ black poly dust cap with 2-tone EM Audio logo
• 0.5″ basket-to-motor spacer sleeves and 8 ga. push terminals
• 6-spoke aluminum basket, powder coated standard gray

Specs

• Mounting depth: 8.75″
• Motor width: 7.25″
• Cutout diameter: 7.325″
• Outside diameter: 8.75″
• Total weight: 39 lbs

Recommended enclosure

Sealed: 0.75 cu ft. Ported: 1.0 cu ft, tuned to 36 Hz. 4th and 6th order friendly. These sizes are for rated power. If you compete or run over rated power, work with your box designer, or run the numbers in our box calculator.

Every EM Audio subwoofer is hand built to order in North Carolina. Custom orders take a minimum of 15 business days to build and are final sale. Custom powder-coat frame and dustcap colors, a stiffer spider pack, direct 8 ga. OFC leads and custom dustcap logo text are available as options above. Real carbon fiber dust caps are in Dust Caps. Recone kits are available for every model we make, so a blown sub is a rebuild, not a replacement.

Measured parameters

Measured in free air on a Dayton Audio DATS with the coils wired as tested (see Re). Treat these as a starting point: every sub is hand built, and upgrades change the numbers. A stiffer spider pack raises Fs, and carbon fiber upgrades lighten the moving assembly, which also raises Fs and lowers Qts. Run them through our box calculator, or ask us for numbers on your exact build. Measured on an all-black NEO 8 after break-in.

The post NEO 8 – 8″ 2,000W RMS Neodymium Subwoofer appeared first on EM Audio Subwoofers.

-***recones are available for all sizes. Just ask.***-

-Mounting Depth:  7.25″
-Motor Width: 7.75″
-Cutout diameter:9.375″
-Outside diameter:10.25″
-Motor weight 31lbs

Box Specifications.
-1.0cu Sealed (10″)
-1.25cu Sealed (12″)
-1.50cu Sealed (15″)
-2.00cu Sealed (18″)
-2.0-2.5cu Ported @ 33-35hz (10-12″)
-2.5-3.0cu Ported @31-33hz (15″)
-4.0-5.0cu Ported @29-32hz (18″)
this is only recommended box size on rated power if you compete or run over rated power please get with your favorite box designer or builder to come up with something different.

this is only recommended box size on rated power if you compete or run over rated power please get with your favorite box designer or builder to come up with something different.

The post EM-1.5krms – EM Audio 10″ Custom Hand built Subwoofer (1500 watts) appeared first on EM Audio Subwoofers.

-***recones are available for all sizes. Just ask.***-

-Mounting Depth: 7.5″
-Motor Width: 7.75″
-Cutout diameter: 11.125″
-Outside diameter: 12.25″
-Motor weight 31lbs

Box Specifications.
-1.0cu Sealed (10″)
-1.25cu Sealed (12″)
-1.50cu Sealed (15″)
-2.00cu Sealed (18″)
-2.0-2.5cu Ported @ 33-35hz (10-12″)
-2.5-3.0cu Ported @31-33hz (15″)
-4.0-5.0cu Ported @29-32hz (18″)
this is only recommended box size on rated power if you compete or run over rated power please get with your favorite box designer or builder to come up with something different.

Measured parameters

Measured in free air on a Dayton Audio DATS with the coils wired as tested (see Re). Treat these as a starting point: every sub is hand built, and upgrades change the numbers. A stiffer spider pack raises Fs, and carbon fiber upgrades lighten the moving assembly, which also raises Fs and lowers Qts. Run them through our box calculator, or ask us for numbers on your exact build. Vas and sensitivity are corrected to a 10.5″ effective piston diameter for this size; the chart was run with 11.5″ entered, which overstates both.

The post EM-1.5krms – EM Audio 12″ Custom Hand built Subwoofer (1500 watts) appeared first on EM Audio Subwoofers.

-1500w rms

-4k max on burp applications

-3″ American made PE coil

-4-layer alum flat wound

-300oz triple stack motor

-Heavy vented motor design

-12 spoke basket powder coated texture black

-4ga. Push terminals or upgradable 8ga. Ofc direct leads

-Black poly dust cap or upgradable real carbon fiber dust cap

-Big roll surround with red stitching

-4 layer progressive EM audio spider pack red on top with xl leads 3 black on bottom

-0.50″ basket spacer sleeves

-Hex head hardware

-2.5″ peak to peak xmax. 30mm 1-way

-Available in D2 or D4 coil configuration
.

-***recones are available for all sizes. Just ask.***-
-Mounting Depth: 8.75″

-Motor Width: 7.75″

-Cutout diameter: 14.125″

-Outside diameter: 15.75″

-Motor weight 31lbs
Box Specifications.

-1.0cu Sealed (10″)

-1.25cu Sealed (12″)

-1.50cu Sealed (15″)

-2.00cu Sealed (18″)

-2.0-2.5cu Ported @ 33-35hz (10-12″)

-2.5-3.0cu Ported @31-33hz (15″)

-4.0-5.0cu Ported @29-32hz (18″)

this is only recommended box size on rated power if you compete or run over rated power please get with your favorite box designer or builder to come up with something different.

Measured parameters

Measured in free air on a Dayton Audio DATS with the coils wired as tested (see Re). Treat these as a starting point: every sub is hand built, and upgrades change the numbers. A stiffer spider pack raises Fs, and carbon fiber upgrades lighten the moving assembly, which also raises Fs and lowers Qts. Run them through our box calculator, or ask us for numbers on your exact build. Vas and sensitivity are corrected to a 13.5″ effective piston diameter for this size; the chart was run with 17.5″ entered, which overstates both.

The post EM-1.5krms – EM Audio 15″ Custom Hand built Subwoofer (1500 watts) appeared first on EM Audio Subwoofers.