The PRO version of our quad encoder knob for the WVC-LITE / WVC / WVC-PRO. Two stacked concentric encoders give you four independent rings and four channel groups, crowned by an ultra-vivid 2.41″ AMOLED touchscreen.

Note: The wireless Knob is a controller, it does not operate as a standalone device! You need to pair it with a WVC (any version).

Key Features

• Gorgeous, ultra-vivid 2.41″ AMOLED touchscreen with deep blacks and rich contrast for live volume, dB readout, amplifier temperature, supply voltage, battery level, and signal strength
• Dual stacked concentric encoders: four independent rings, each controlling its own channel group
• High-quality aluminum housing that feels premium in your hand
• Flexible per-ring channel group assignment, configurable straight from the knob
• Long-range, encrypted AuralSync™ wireless link to your base station
• Live spectrum and oscilloscope views when paired with a WVC-PRO base station
• Rechargeable battery with USB-C charging, and it charges whether the knob is switched on or off
• Automatic sleep with instant wake on press, plus over-the-air firmware updates

Why You’ll Love It

The most capable knob we make. Four zones under two fingertips, live system vitals on a display that stays legible in any light, and the same aluminum build quality as the rest of your LF Audio gear. If your system runs multiple channel groups, this is the control it deserves.

📖 Documentation

Full guides and troubleshooting at help.lf-audio.com/wvc:

• PRO Knob Guide
• Channel Groups and Multi-Unit Control
• Firmware Updates
• Troubleshooting

The post WVC Quad PRO Knob appeared first on EM Audio Subwoofers.

The PRO version of our dual encoder knob for the WVC-LITE / WVC / WVC-PRO. Two full-size encoders give you two channel groups, crowned by an ultra-vivid 2.41″ AMOLED touchscreen that makes every readout pop, day or night.

Note: The wireless Knob is a controller, it does not operate as a standalone device! You need to pair it with a WVC (any version).

Key Features

• Gorgeous, ultra-vivid 2.41″ AMOLED touchscreen with deep blacks and rich contrast for live volume, dB readout, amplifier temperature, supply voltage, battery level, and signal strength
• Two independent precision encoders, each rated for a 100,000 cycle minimum rotational life, each with its own push button
• Independent control of two channel groups: subwoofers and mains, front and rear, or any two zones your system defines
• High-quality aluminum housing that feels premium in your hand
• Long-range, encrypted AuralSync™ wireless link to your base station
• Live spectrum and oscilloscope views when paired with a WVC-PRO base station
• Rechargeable battery with USB-C charging, and it charges whether the knob is switched on or off
• Automatic sleep with instant wake on press, plus over-the-air firmware updates

Why You’ll Love It

Everything the dual knob does, on a screen that belongs in a flagship build. The AMOLED panel stays crisp in direct sunlight and glows without glare at night, and the aluminum housing matches the rest of your LF Audio gear.

📖 Documentation

Full guides and troubleshooting at help.lf-audio.com/wvc:

• PRO Knob Guide
• Channel Groups and Multi-Unit Control
• Firmware Updates
• Troubleshooting

The post WVC Dual PRO Knob appeared first on EM Audio Subwoofers.

The BassWatch brings your entire system to your wrist. A bright 2.06-inch AMOLED touchscreen shows the time at a glance, then becomes a live readout for every AuralSync™ device in your system.

Stream your voice-coil or amplifier temperature from the WTH, your voltage from the HPVM, amplifier impedance, power output, and rise from the HPPM, or take command of your volume through the WVC. Move between voltage, temperature, live spectrum, oscilloscope, and waterfall views with a tap.

Note: The BassWatch is a display / controller, it is not meant to operate as a standalone device without companion devices. You need to pair it with a WVC, SSA, HPPM, HPVM, MAS, or other LF Audio devices. The more devices you pair it with, the more sensor data and control options become available.

Key Features

• Wireless freedom over AuralSync, streaming from every LF Audio device in your system with no extra cables to run
• Streams voltmeter, power meter, temperature, and system controller data straight to your wrist
• Real-time spectrum, oscilloscope, and waterfall views bring your signal into focus
• Full-color AMOLED touchscreen for adjusting volume and controlling devices remotely
• Raise-to-wake and intelligent multi-stage sleep keep the display ready without draining the battery
• Over-the-air updates deliver new features and refinements over time
• Rechargeable 400mAh battery for all-day, cable-free wear

Why You’ll Love It

Whether you’re dialing in a tuning session in the driveway, keeping an eye on your voltage and amplifier temps from the driver’s seat at a competition, or showing off your build at a meet, the BassWatch puts your system’s telemetry on your wrist. 

The watch face shows the time at a glance, then a tap drops you into a live monitoring screen for your WVC base station: voltage and volume on any base, plus amplifier temperature and real-time spectrum, oscilloscope, and waterfall views on a WVC-PRO or PRO 6.

Reach over and set your volume, or adjust the base station’s settings, straight from the screen, with no knob and no phone required.

It wakes when you raise your wrist, dims and sleeps on its own to save power, and charges over USB-C, so there’s nothing to wire in and nothing to reach for.

📖 Documentation

Full user guides, setup walkthroughs, and troubleshooting at help.lf-audio.com/basswatch

The post BassWatch appeared first on EM Audio Subwoofers.

The Wireless Data Display LITE (WDD-LITE) brings every AuralSync™ device in your system onto a single vivid 2.41″ AMOLED touchscreen. Voltage, wattage, amperage, temperatures, volume, and more, anywhere you want it.

Note: The WDD-LITE is a display / controller, it does not operate as a standalone device. You need to pair it with a WVC, SSA, HPPM, HPVM, MAS, or other LF Audio devices. The more devices you pair it with, the more sensor data and control options become available.

Key Features

• Live wireless data on a single screen: HPVM voltage, HPPM wattage / voltage / amperage, WTH amp and voice-coil temperatures, WVC volume, and more
• Vivid 2.41″ AMOLED touchscreen with deep blacks, high contrast, and swipe / tap navigation between connected devices
• Wireless freedom over AuralSync, no extra cables to run
• Flexible mounting: flush mount into your dash, or drop it into the included pod for a clean surface install
• Optional rechargeable battery, so you can choose a permanently powered build for in-vehicle install, or a portable build for demos and walk-arounds

Why You’ll Love It

Whether you’re showing off your build at a meet, dialing in a tuning session in the driveway, or keeping a permanent eye on amp temps and rail voltage from the driver’s seat, the WDD-LITE puts your entire system’s telemetry in the palm of your hand. The 2.41″ screen surfaces more data at once than a dash-mount controller, and the touch interface lets you flip between paired devices with a swipe.

Form factor

The WDD-LITE housing measures 59mm wide x 46.5mm tall x (28mm with battery / 23mm without), with the 2.41″ AMOLED touchscreen filling the front face. Compact enough to ride in a cup holder, pocket, or center-console tray between uses. Large enough to read at a glance from across the vehicle.

Installation options

The WDD-LITE is designed to install your way:

• Flush mount: drop the bare display into a 59mm x 46.5mm x (28m w battery / 23mm wo) cutout in your dash, panel, or kick for a clean, integrated factory look.
• Pod mount: use the included LF Audio pod for a surface install on top of the dash, A-pillar, or center console. No cutting required.

Full installation visuals at help.lf-audio.com/wdd-lite

Choosing a variant

• No battery: for permanent powered install, wired into your vehicle. Lower cost, never needs charging, always on with the vehicle.
• With rechargeable battery: for portable use at meets, demos, tuning sessions, walk-around diagnostics. Untethered, grab-and-go with 8 hours of runtime.

📖 Documentation

Full user guides, installation videos, and troubleshooting at help.lf-audio.com/wdd-lite

The post (WDD-LITE) Wireless Data Display LITE appeared first on EM Audio Subwoofers.

The post Stubby 2.4ghz 3dBi Antenna appeared first on EM Audio Subwoofers.

This unit has been optimized to balance thermocouple and adhesion perfectly by ensuring the probe touches the amplifier while the adhesive tape buffers the installation. 

The post WVC-PRO temp probe mount appeared first on EM Audio Subwoofers.

Please note, knob and TPU case in photos not included, used only for reference.

The post WVC Knob Protective Case Mount appeared first on EM Audio Subwoofers.

The post WVC Knob Protective Case Mount (Dual Encoder) appeared first on EM Audio Subwoofers.

Please note, knob in photos not included, only for reference.

The post WVC Knob Protective Case appeared first on EM Audio Subwoofers.

It can be paired with the larger WVC Knob Protective Case Mount (Single Encoder)

The post WVC Knob Protective Case (Dual Encoder) appeared first on EM Audio Subwoofers.