1Fitment
This is a direct fit high-output alternator for the 2014-2019 Toyota Corolla 1.8L. Being a direct fit, this alternator fits directly into your stock alternator location.
2Plug & regulator
This high-output alternator comes with a 14.8 Volt GM Style Internal Regulator with pigtail plug. This alternator is not plug-and-play and must be wired with a pigtail plug.
NOTE: If you require charging at a certain voltage setpoint, we offer a selection of different voltage regulators that you will need to purchase with the alternator for it to be installed.
3Pulley & belt
This alternator also comes with a smaller pulley, which causes it to spin faster than a larger pulley. This can help the alternator produce its maximum output. With a smaller pulley, it is required to install a 1/2" - 1" shorter belt.
Part numbers for shorter belt:
(2014-2018 Gas Naturally Aspirated K, U) Dayco part number: 5060480
(2014-2018 Gas Naturally Aspirated K, U) Metric part number: 6pk1220
(2014-2018 Gas Naturally Aspirated P) Dayco part number: 5060475
(2014-2018 Gas Naturally Aspirated P) Metric part number: 6pk1205
(2019 Gas Naturally Aspirated U) Dayco part number: 5060480
(2019 Gas Naturally Aspirated U) Metric part number: 6pk1220
(2019 Gas Aspirated) (M20A-FKS) Dayco part number: 5060433
(2019 Gas Aspirated) (M20A-FKS) Metric part number: 6pk1100
(2019 Gas Aspirated) (2ZR-FAE) Dayco part number: 5060475
(2019 Gas Aspirated) (2ZR-FAE) Metric part number: 6pk1205
Tip: take your old belt to the parts store and get one ½" to 1" shorter.
4Big 3 wiring
When Upgrading to a High-Output Alternator, it is required to upgrade your wiring with the Big 3 Wiring Upgrade Kit. It is recommended to use 1/0 100% copper wires for the upgrade.
You can add a Big 3 kit in the options above. See the kits →
Notes
High Output Alternator for the 2014-2019 Toyota Corolla 1.8L
The 2014-2019 Corolla is a reliable daily driver and a common starting point for audio builds, but its factory charging system leaves little room for extra amplifiers or lighting. This JS Alternators high output alternator is a direct fit for the stock alternator location on the 1.8L. It uses a 14.8-volt GM-style internal regulator and connects with a pigtail plug, so plan for a little wiring during installation (see the plug notes below).
Fits these model years:
2014 Toyota Corolla 1.8L
2015 Toyota Corolla 1.8L
2016 Toyota Corolla 1.8L
2017 Toyota Corolla 1.8L
2018 Toyota Corolla 1.8L
2019 Toyota Corolla 1.8L
Available output: 250 amp or 320 amp.
Why upgrade? A quick load check
A 1,000-watt RMS amplifier can draw roughly 80 to 100 amps at full output. Add the car's own lighting, cooling fans and electronics, and a factory alternator runs out of headroom quickly, especially at idle. The 250 amp option suits most single-amplifier systems; choose 320 amp for larger builds.
Want more detail? Read our alternator sizing guide.
About JS Alternators
JS Alternators builds high output alternators for car audio, off-road and performance in Anderson, South Carolina. Every unit is assembled and bench tested before it ships, and EM Audio carries the full line. Your order ships directly from JS.


Reviews
There are no reviews yet.